Maintaining and fixing Antminer T17+ hash boards might be a frightening undertaking, but with the appropriate know-how and direction it is feasible to keep your hardware managing optimally. This information will give beneficial ideas regarding how to detect challenges while in the board, as well as how to diagnose, fix and keep them for optimal effectiveness.
There are now heatsink updates which entail eliminating all the initial heatsinks soldered to your hashboard after which replacing them with bulk heatsinks that may be screwed to the hashboard, staying away from the most significant issue of the generation.
Safety Challenges: There's a chance of putting in destructive or badly designed firmware, which could compromise the security of your respective mining Procedure.
Reconfiguration and Screening: After the improve, re-enter your mining pool configurations and conduct a check to confirm every thing is functioning as expected.
Disconnect the Old Control Board Diligently disconnect the 3x eighteen-pin signal cables, PSU ability extension cable, voltage regulating cable, and 4x fan cables through the aged control board.
When changing a chip, it is critical to pay for near notice for the operation technique to avoid any clear deformations with the PCB board. It's important to check for any open or limited circuits, or missing components inside the substitute areas and their surroundings.
If no difficulty is observed by way of visual inspection, the impedance of every voltage area may be tested very first to detect no matter whether there is a shorter circuit or an open up circuit. If Of course, it needs to be taken care of initial.
Our hashboards, renewed and upgraded as a result of D-Central’s Restoration method, tend to be more dependable than new, straight within the producer. By changing your defective hashboards with ours, it is possible to keep your Antminer T17+ running at its most opportunity and lengthen its provider life.
The PIC chip dsPIC33EP16 is located on the higher remaining aspect of your reverse aspect of the hashboard, and there is a overall of one PIC chip on the whole board.
two. Insert the cardboard reader to the OTG cable, and insert the OTG cable (or straight insert the OTG U disk) to the Micro USB port on the front of your miner.
Ahead of connecting it to your output with the Improve module, we have to take a look at the constructive and unfavorable poles of C1314 which has a multimeter.
You can find 20 chip capacitors on the whole board, distributed among the voltage domains around the back batchminer from the hashboard. The key perform would be to filter and rectify, to obtain voltage harmony amongst the voltage domains.
55V and is equipped with the LDO to provide ability to VDDIO one.8V and VDDPLL 0.8V. The T17+ clock is really a 25M crystal oscillator that may be transmitted in collection from the 1st chip into the forty fourth chip.
Your browser isn’t supported any more. Update it to have the greatest YouTube knowledge and our most current options. Learn more